BW Series Apron Feeder

The apron feeder is a bulk material conveying equipment that converts intermittent feeding into continuous feeding. It is widely used for transporting high-capacity, high-water content, and high-viscosity materials.

Capacidad

80-1900T/H

Máximo. Tamaño de entrada

Max raw size

Min. Output size

Min raw size

60s en línea
servicio al cliente

2 Días personalizar
soluciones

Fábrica
Visitando en cualquier momento

1-10 despacho de días
los bienes

Una semana
de instalación

2 días de
capacitación

365 días
Aftervales en línea

Seguimiento de proyectos
regularmente

2 Días proporcionar
plan de mantenimiento

Servicio previo

Servicio de ventas

Servicio postventa

Consejo1: El acuerdo de tiempo específico depende de la situación real. Punta2: Transferencia de aeropuerto y alojamiento de hotel gratis.

BW series apron feeder is to convey loose material, which changes the traditional intermittent feeding method to a continuous feeding method.BW series apron feeder not only gets used to different working environments but also to different material conditions such as humidity, viscosity, etc. The apron feeder is widely applied among quarries and mines, cement factories, road construction, etc.

Technical Features

Robust design:

The slot plate adopts a stamping and welding structure with a large load-bearing capacity.

Long service time:

For BW type, the tail has sleepers to absorb vibration, and the middle has vibration-absorbing rollers to support, which increases the service life of the running parts

Good performance:

Large traction, less leakage, and smooth operation

Economic:

The drive device adopts a suspended single-point floating support method to reduce the radial installation size of the plate feeder

Working Principle

A high-strength bulldozer die-forged chain with a pitch of 228.6mm (9 inches) is used as the traction part. Two chains are connected to form a closed loop by passing through a pair of driving sprockets installed at the head of the machine body and a pair of tensioning wheels at the tail of the machine body. Each link of the two rows of chains is equipped with overlapping, heavy-duty conveying troughs to form a continuous conveying line capable of carrying materials.

Its dead weight and the weight of the materials are supported by multiple rows of supporting rollers, chain support wheels, and slideway beams installed on the machine body. The transmission system is connected to the reducer through an AC variable frequency speed regulating motor, and then the expansion sleeve is directly connected to the drive device to drive the carrying mechanism to run at a low speed. The materials unloaded from the tail silo are transported to the front of the machine body along the conveying line for discharge, to achieve the purpose of continuous and uniform feeding to the working machinery below.

Technical Parameter

Model	Funnel Width（mm）	Max Feed Edge (mm)	Center Distance Between Head and Tail Drums	Capacidad (T/H)	Motor Power (kw)
BW1000	1000	500	The Length Can Be Customized According To Clients’ Requirements.	80-160	11-15
BW1200	1200	600		100-200	11-30
BW1250	1250	650		100-250	11-18.5
BW1400	1400	700		120-290	15-22
BW1500	1500	700		280-460	15-45
BW1600	1600	800		300-600	22-30
BW1800	1800	800		500-900	37-45
BW2200	2200	1200		600-1400	45
BW2300	2300	1300		800-1600	55
BW2400	2400	1500		1000-1900	75

***The capacity will vary according to different materials, feed particle size, and other factors. Please contact VEST for equipment selection for specific projects.

Traducción