Hogar » Producto » Máquina auxiliar » Lavadora » Arena espiral »

LX series Spiral Sand Washing Machine

LX Series Spiral Sand Washers can wash and separate the soil and foreign material in the sand.Its novel structure, adjustable overflow dam baffle and reliable arrangement can make sure the result of the wash.

Capacidad

70-450T/H

Máximo. Tamaño de entrada

<10mm

Min. Output size

Min raw size

GET QUOTES GET A BROCHURE

60s en línea
servicio al cliente

2 Días personalizar
soluciones

Fábrica
Visitando en cualquier momento

1-10 despacho de días
los bienes

Una semana
de instalación

2 días de
capacitación

365 días
Aftervales en línea

Seguimiento de proyectos
regularmente

2 Días proporcionar
plan de mantenimiento

Servicio previo

Servicio de ventas

Servicio postventa

Consejo1: El acuerdo de tiempo específico depende de la situación real. Punta2: Transferencia de aeropuerto y alojamiento de hotel gratis.

Spiral type sand washing machine is a kind of sand washing machine. It mainly stirs the sand and gravel through the spiral device inside the equipment, so that the soil and water in the sand and gravel are mixed and discharged from the flow port on the equipment. The sand and gravel are gradually screened under the action of the spiral device and discharged from the discharge port at the top, thus achieving the cleaning and screening effect of the sand and gravel.

Technical Features

Stable operation performance:

The impeller drive bearing device is isolated from water and water-receiving materials, which greatly avoids the bearing damage caused by water immersion, sand, and pollutants and has a low failure rate.

Long service time:

The fittings are highly matched, the operation is relatively stable, and the wearing parts are made of highly wear-resistant and pressure-resistant raw materials. The whole machine has a low failure rate and is durable.

Perfect washing efficiency:

It has a high degree of cleaning, and the sewage can be recycled, which effectively saves resources and increases the output of the whole machine.

Most advanced choice for washing:

There is very little loss of medium and fine sand and stone powder, and the grading and fineness modulus of the washed building sand meet the national standards.

Working Principle

When the spiral sand washing machine works, the constant sharp motor drives the impeller to rotate slowly after the gear slows down through the triangle belt, the reducer, and the gear decelerates.

The sand and stone feed groove enters the washing tank, rolls under the drive of the impeller, and grinds each other to remove the impurities covered with sand and stone, and at the same time destroys the water vapor layer covered with sand particles to facilitate dehydration.

At the same time, add water to form a strong flow, and take away impurities and small dust.

Technical Parameter

Model	Screw Diameter.(mm)	Screw Qty.(pcs)	Sink length.(mm)	Screw Rotate Speed.(r/min)	Water Consumption.(T/H)	Capacidad.(T/H)	Power (kw)
LX800	φ800	1	7620	26	10-60	70-80	11
LX920	φ920	1	8000	21	10-90	100	15
LX1200	φ1200	1	8500	17	20-160	150-200	15-18.5
LX1500	φ1500	1	10000	17	60-220	200-250	22
2LX800	φ800	2	7620	26	10-120	150	2×11
2LX920	φ920	2	8000	21	20-160	150-200	2×15
2LX1200	φ1200	2	8500	17	40-300	350	2×18.5
2LX1500	φ1500	2	10000	17	50-400	450	2×22

*The output will vary according to different materials, feed particle size, and other factors.

Traducción