NP Series European Impact Crusher

60s online
pelayanan pelanggan

2 hari -hari menyesuaikan
solusi

Pabrik
mengunjungi kapan saja

1-10 Hari pengiriman
barang

Seminggu
instalasi

2 hari -hari
pelatihan

365 hari -hari
setelah penjualan online

Pelacakan Proyek
secara teratur

2 hari menyediakan
rencana pemeliharaan

Layanan pra-penjualan

Layanan penjualan

Layanan purna jual

TIP1: Pengaturan waktu spesifik tergantung pada situasi aktual. TIP2: Transfer bandara gratis dan akomodasi hotel.

NP system impact crusher has been optimized with a larger crushing chamber and larger feed particle size. It also improves production efficiency under various application conditions by optimizing the liner and specific rotor. It is mainly used in metal mines, non-metal mines, sand and gravel aggregates, construction recycling, chemical industry, and other fields. It is generally used to crush materials with low abrasiveness below medium hardness. It can be used for coarse crushing, medium crushing, and fine crushing. It has a large crushing ratio and a good finished product particle shape.

Technical Features

Optimal design of rotor:

Optimize the heavy-duty design of the rotor, increase rotational inertia, and improve productivity.

Flexible configuration:

The cavity type and wear-resistant plate hammer are selected according to different purposes and a better output ratio.

Good final-stone shape:

Semi-open the discharge system finished material particle shape is good, cube, conducive to recycling.

Modular design of wearing parts:

Through reasonable design and layout of wear-resistant lining plates, reduce the types and improve the utilization rate of wearing parts.

Working Principle

Impact crushers use high-speed impact to crush materials. When the material enters the action area of the blow bar from the feed port, it is first crushed by the high-speed impact of the blow bar.

And the strong impact force throws the material to the impact plate for further crushing, and the material rebounded by the impact plate falls to the plate again.

Continue to repeat the above process until the material is crushed to be smaller than the size of the discharge port, and it will be discharged from the discharge port due to its weight.

Technical Parameter

Model	Feeder Opening Size（mm）	Rotor size（mm）	Max. Feeding Size(mm)	Max Rotating Speed(rpm)	Motor Power （kw）	Capacity（t/h）
NP1007	750×800	φ1000×700	500 (300)	800	90-110	100-150
NP1110	1020×820	φ1100×1000	600 (300)	800	132-200	150-250
NP1213	1320×880	φ1200×1300	600 (350)	700	200-250	200-300
NP1315	1540×930	φ1300×1500	600 (400)	700	250-355	300-400
NP1520	2040×995	φ1500×2000	700 (400)	600	400-630	350-600
NP1210	1020×1080	φ1200×1000	800 (400)	700	160-200	250-380
NP1313	1320×1200	φ1300×1300	900 (450)	700	200-250	350-520
NP1415	1540×1320	φ1400×1500	1000 (600)	600	250-315	400-600
NP1620	2040×1630	1600×2000	1300 (700)	500	400-500	650-950
NP2023	2310×1980	φ2000×2300	1500 (800)	520	900-1200	1300-2000
NP13	1320×560	φ1200×1300	350	700	250-315	250-350
NP15	1540×600	φ1300×1500	400	700	315-355	300-400
NP20	2040×700	φ1500×2000	400	600	500-630	500-600

***The capacity will vary according to different materials, feed particle size, and other factors. Please contact VEST for equipment selection for specific projects.

Terjemahan